saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 1/7 top view side view bottom view 1 2 3 4 5 features pcs applications usable bandwidth 58.9 mhz no impedance matching require for operation at 50 smd package 1.4 mm 1.0 mm 0.5 mm singleended operation package dimensions maximum ratings parameter unit minimum typical maximum operating temperature range c 30 25 85 storage temperature range c power handling capability dbm electrostatics sensitive device ( esd ) pin configuration 1 input 4 output 2, 3, 5 ground
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 2/7 specifications fc =1880.0mhz terminating source impedance : single 50 terminating load impedance : single 50 notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances minimum typical maximum center frequency mhz 1880.0 insertion loss (1850.6~1909.4 mhz) db 2.4 4.8 amplitude ripple (1850.6~1909.4 mhz) db pp 1.3 2 .7 relative attenuation d.c. ~ 1570 mhz 1570 ~ 1580 mhz 1580 ~ 1770 mhz 1770 ~ 1829.4 mhz 1930.6 ~ 1989.4 mhz 1989.4 ~ 3000 mhz db 40.0 35.0 30.0 20.0 17.0 12.0 48.0 46.0 54.0 39.0 39.0 22.0 vswr (1850.6~1909.4 mhz) 2.0 2.5
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 4/7 typical performance
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 5/7 s11, s22 vswr s11, s22 smith chart
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 6/7 s21 wide band
saw bandpass filter f1g8a part no. ncll01f1g8a rev. date 20101217 i t f co., ltd. 102901, bucheon technopark 364, samjeongdong, ojeonggu, bucheoncity, gyounggido, korea 421809 rev. ps01 7/7 packing specification 1. reeling quantity : 3,000 pcs / reel (or 15,000 pcs / reel) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
|